Archways & Ceilings UCK Instalační příručka stáhnout pdf (Strana 3)

NEW CONSTRUCTION

WITH

NO REVEAL

Framed room with no drywall

At each corner of the room, measure and mark the wall down

from the ceiling 11 ¼”. Measure and mark the ceiling out from

the wall 11¼”.

Block in-between the wall studs and/or ceiling, if necessary,

to suciently attach the cove pieces. If building code requires

you to re block, reference Step 8. In this case, combining

steps 2 and 8 can save time.

Using your marks as a guide, snap a line (with your chalk line)

on the wall and on the ceiling around the entire perimeter of

the room.

Using a staple gun w/ 1” (or greater) staples/brads (PROs) or a

screw gun w/ 1” (or greater) deck screws (DIYers), install your

90° inside and/or outside corners (right angle) to align with

your snap lines.

Using a staple gun w/ 1” (or greater) staples/brads (PROs) or

Screw Gun w/ 1” (or greater) deck screws (DIYers), attach a cove

piece butted to each side of each corner (either touching the

top of an inside corner or the bottom of an outside corner).

Measure, mark and then attach all other cove pieces in-between

the butted cove pieces on each corner no more than 16” O.C.

Helpful Tip: For help spacing your cove pieces evenly between

each corner, visit www.archkit.com/cove-spacing to watch our

“How-To” video and see the mathematical formula.

If necessary,

and/or

according to code requirements, re block

your Universal Cove Kit in between the studs along

the perimeter.

The 6 90° corners are reversible to t both inside

and outside corners. If you have an inside 90°

corner, then the top halves will are outward like

the etchings of an arrow. If you have an outside 90°

corner, then the top halves will come to a point like

the head of an arrow.

inside corner 90

outside corner

If applicable, install your 45° inside corners by using 4 of the

40 cove pieces that have already been modied to be used as

a cove piece as well as 45° inside corner.

If you have a 45° outside corner,

a template on the side panel

of the box has been provided.

Trace your 45° outside corner on

to a piece of ½” plywood/OSB,

cut it out and then install.

1 2 3 4 5 6 7 8 ... 12 13

Komentáře k této Příručce

Žádné komentáře

Archways & Ceilings UCK Instalační příručka Strana 3

Komentáře k této Příručce

Související produkty a manuály pro ne Archways & Ceilings UCK